Videos
for JR Products
Help Articles
for JR Products
Expert Answers
for JR Products
A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.
view full answer...Yes, the lid is available as a replacement part. Based on the part numbers you gave me the correct replacement lid is the #FVK1020-19. For the lift arm you can use the #FVK8011-05.
view full answer...We don't have the exact screen door handle for the 990003-01 kit, but we do have the Replacement Screen Door Latch for Left Swinging RV Entry Door #LC201472 that could work just as well. This will replace latch for your RV door that swings to the…
view full answer...To flat tow a 2024 GMC Sierra 2500 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Direct-Connect Base Plate item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms…
view full answer...I am sure we do! We have a few different styles of mounting brackets like the Taylor Made Flat Mounting Brackets for Gas Struts item #3691858 you were looking at or the Flat Mounting Brackets item #TM45YR. I have linked the rest of our selection…
view full answer...Yes, the Heavy Duty Equalizer Suspension Kit part #K71-360-00 does fit your 2008 Weekend Warrior 300FS that has a triple axle setup and a 35 inch wheelbase.
view full answer...Hey Tom, The Hott Rod RV Water Heater Conversion Kit #DGR6VP gets plugged into a 110v outlet for power so you'd use a typical light switch #37212225 to control the power running to the outlet that powers the kit.
view full answer...A typical RV entry door gas strut ranges from 10-20lbs in pressure. We carry both a 10lbs #372-5300-10 and 20lbs #372-5300-20 that you can use. Really it just comes down to preference and the climate. If you're in a windy climate going heavier…
view full answer...Hi Robert, To install your Putco Blade LED Tailgate Light Bar #P22KR you'll need to just remove the tail lights so that you can get access to the back wiring in the back of them. The plug-and-play connectors on the wire harness with have a male…
view full answer...Hey Shane, it sounds like you're looking for the Quick Disconnect Propane Hose #37207-31185. This hose is 6' long, has 1/4" male quick-disconnect and a 1/4" male NPT fitting, but also includes an adapter with 1/4" female NPT…
view full answer...Hello Gaby. I reached out to the manufacturer and found out that the UltraFab Weld-On Jumbo Steel Roller #UF48-979023 uses a 6-1.0mm Zerk fitting. For a replacement you can use the following: - Replacement Brass Grease Zerk for Weld-On Hinges - 6 mm…
view full answer...The only tank equipped RV water heat option we currently offer is the Dometic RV Water Heater part #DMC74FR which is a 120 volt unit with 6 gallon tank and gas/electric operation. In regards to installation, this must be performed by a qualified…
view full answer...
What our customers are saying:
"Excellent order notification process. They tell you when they get your order, when it will be filled, when it will ship, when it ships. Solid."