Videos
for Counteract
Help Articles
for Counteract
Expert Answers
for Counteract
I wasn't able to find your specific part number hub but if you have a 5,200 lb hub with a 6 on 5-1/2 inch bolt pattern you are going to need a 1/2 inch drive in stud. If your existing drive in studs are 1-13/16 inches long (measurement B in…
view full answer...The position of the axle should dictate the position of the springs and hangers not the other way around. With that being said, in order to determine proper placement of the hangers you will want to take the the distance between the two eye holes on…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…
view full answer...The Westlake ST205/75R15 Radial Tire w 15" Lynx Aluminum Wheel - 5 on 4-1/2 - LR D - Silver #LHAW320 does not come balanced as, typically, trailer tires don't need to be balanced like standard passenger vehicle tires. Doing so may not…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...Yes, you need the 6 oz bag of the Counteract Tire Balancing Beads #CA44FR for your 235/75R17.5 tires. This is a single bag but we have it available in a 4-pack as part #CA55FR as well is your trailer is a tandem axle. You will need to remove your TST…
view full answer...Since the trailer wheel and tire #AM31990 is a 13 inch diameter wheel that is steel and designed for 1/2 inch diameter wheel studs the correct lug nut torque is 90-100 ft lbs.
view full answer...It will depend on the bolt hole spacing of your existing equalizer. The bolt hole height difference of the #K71-652-00 is 2 inches, and the side to side hole spacing is compatible with existing equalizers that have holes spaced between 5-1/4 and…
view full answer...It looks like the Harbor Freight Folding Trailers use a Jeep style fender so if that's the case then the best option we have for replacement is the Single Axle Trailer Fender part #HP99VR which will work just fine with 4.80x12 tires. That said,…
view full answer...All of our bumper strips are 96" long and have the holes pre-drilled out at 11" on center, but the nice thing is these can be cut and re-drilled to accommodate your application. You just need to choose which one has the width you're…
view full answer...Trailer Tires do not require balance weights based on their design and function. They are balanced based on high point and low point of the wheel and tire being used together. The high point is marked on the tire and will be placed in line with the…
view full answer...
What our customers are saying:
"Great product. fast, professional, and well communicated service. it was a pleasure buying from y'all. thanks again"