Videos
for MaxxTow
Help Articles
for MaxxTow
Expert Answers
for MaxxTow
The Replacement Inner Member for Dexter DX7.5L Actuator #DX39FR is the correct replacement for Dexter DX7.5L and Legacy UFP Brake Actuators which includes your Tie Down 75LP. The two wires are connected to the reverse lock-out solenoid, one of the…
view full answer...The #DX39FR Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball is what you need. This is the replacement inner member for Dexter DX7.5L and Legacy UFP Brake Actuators like your UFP A-60 so it would be exactly the…
view full answer...I can help you pick out the correct hub, but we don't have a cross-reference part number for the one you listed. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first…
view full answer...In order to choose the correct ball mount for your tow vehicle and trailer, you will first need to take a couple of measurements. With your tow vehicle parked on level ground, take a measurement from the ground to the top of the trailer hitch…
view full answer...Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…
view full answer...You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub you…
view full answer...The Bestop Element Upper Doors, part #B5179515, that you referenced does fit a 1993 Jeep Wrangler, but it does not fit the 2009. The proper part number for the 2009 is #B5180535. This is for the upper door. If you need the full door, we have that…
view full answer...When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…
view full answer...I'm going to attach a dimensional drawing of the Timbren #TSR5KS02 for you to check out, and you won't want to install any type of spacer. I can see how what they're telling you might be confusing, but the suspension isn't going to be…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
view full answer...Thanks for the information! Based on the information you provided my contact at Dexter was able to confirm that you have a 3500lb axle with a 94.5" hub face to hub face measurement and an 81" spring center to spring center measurement. For…
view full answer...I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…
view full answer...
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."