Customers compare OPT58FR to these similar products
Products Featured in this Video
Hello, neighbors. It's Brad here at etrailer. And today, we're taking a look at the Optronics OptiBright 12 and 24 Volt RV Dome Light. Now, this is gonna be a great option for updating any of your lighting in your camper, RV, or any trailer. Currently in our enclosed trailer, we do have three LED lights that you can see mounted up. They each have nine diodes, so upgrading to more diodes and… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does. That being said the trickle charge coming…
view full answer...We do have replacement options for the Jensen JRV9000 though they are not touchscreen or video compatible. The JRV9000 is a double din so you will need to replace it with such like the Jensen RV Stereo part #JWM60A which is a more basic model. The…
view full answer...The Pollak switch part #PK34513 that you referenced would be a great option, but I'd rather recommend you go with the Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount #337SW911 as this setup was made for your…
view full answer...Since LED lights do not require a lot of amperage you can go with relatively small wire. Using 16 or 18 gauge wire will be fine. Harness #A20WB uses 20 gauge wire which is on the small side but certainly not a problem at all for LED lights even…
view full answer...The Progressive Dynamics RV Power Control Center #PD4135K is going to be the closest in dimensions to replacing the Magnetek model 80 power center you have. This control center fits inside a 10-1/4" long x 7" tall cutout and is…
view full answer...According to my research the Bargman 3478515 (discontinued) porch light uses a #93 bulb. We don't carry that specific bulb, but it also looks like a 1141/1156 bulb (which we do carry) can be used as a replacement for a #93 bulb. I recommend…
view full answer...The measurement you're referring to for the Erickson Removable Motorcycle Wheel Chock #EM07506 is 8". This wheel chock has overall measurements of 11-3/4" long x 8-1/4" wide x 8-1/2" tall and will fit tires…
view full answer...Yes. The U-Post RV LP Gas Regulator Bracket - Qty 1 #37207-30405 is the correct mounting bracket for both the #37207-31525 and #37207-30395.
view full answer...So smart alternators are one that typically have a lower voltage charge when the vehicle is accelerating and then a drastically higher voltage when the vehicle is coasting. This is a way to minimize the load on the engine when needing the power of…
view full answer...Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you…
view full answer...The best option we have to replace the AV615BHM is the Furrion RV Stereo #DV1230BL. This is also a double din stereo with a DVD player and Bluetooth connectivity; just keep in mind it does require a cutout of 6-15/16" wide x 4" tall…
view full answer...Yes, a galvanized wheel will resist rust and corrosion better than a painted/coated wheel. This will apply to both the bead seat and face. In regards to cost, if you do not have access to a tire mounting machine or the means to use one for that…
view full answer...