Customers compare EM58523-09162-4 to these similar products
Products Featured in this Video
Hey guys, Jake here with eTrialer. Today we're going to be taking a look at and I'm going to show you how to use the Erickson Tie Down Kit. This is going to be a kit that's specifically designed to tie down your car inside an enclosed trailer or an open trailer.It's going to utilize the e-track technology. It's going to have three connection points. You'll have one here at the back for your… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.
view full answer...For your Dodge Challenger I recommend using the Erickson E-Track Tie-Down Kit #EM58523-09162-4. With this kit you get 4 e-track wheel straps that will provide you a great way of securing your Challenger. The straps will be easier to route around…
view full answer...How large of a toolbox are you looking for? These toolboxes are not custom fitted, so there are going to be a lot of options as far as height, depth and cubic footage. Based on pictures I can see of these Big Tex 60pi trailers, there is a good amount…
view full answer...Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be prone to…
view full answer...Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…
view full answer...The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram.
view full answer...The Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your application I recommend installing the Brophy D-Ring Tie…
view full answer...Yes, the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks #EM58523-09162 can be used with tires that are mounted on 20 inch diameter wheels.
view full answer...The Erickson E-Track Tie-Down Anchor #EM37JR is 5.2" Long, 5.2" wide and 0.5" tall. The two 5/16" holes are centered on each side of the of the bracket 2.75" from each other. Please see the attached image.
view full answer...The correct screw/bolt size for the Erickson ATV E-Track Tie-Down Kit #EM98CV is 1/4". The best hardware will depend on your exact application and the material and thickness you're attaching these too. If your mounting surface is no more…
view full answer...Since you plan on attaching your fasteners to the studs of the wall the amount of screws you plan to use would be plenty. We recommend using more screws in situations where studs are not accessible. The recommended height will be whatever works best…
view full answer...Yes, the Curt Safety Chain Loops for Ford Factory Rail Kit part #C60691 that you referenced are a confirmed fit for the factory rail kit in the bed of your 2019 Ford F-350. I attached a review video for this kit for you to check out as well.
view full answer...