Customers compare DL22335 to these similar products
Products Featured in this Video
Jake: Hey guys, Jake here with etrailer. Today we're going to be taking a look at the Dutton-Lainson premium pivoting tongue jack. This jack is going to help you to be able to jack up your trailer to get it onto your vehicle and store in a nice, convenient stored position when you're traveling.Something you're going to notice right away when you see this jack is it's going to have a… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I have included a dimensional drawing of the Dutton-Lainson Round Swivel Jack #DL22335 that shows the overall extended height of the jack at 40-5/8" tall. This measurement is from the bottom of the wheel to the top of the jack when…
view full answer...Here is a Dutton-Lainson Round Swivel Jack #DL22335 it has an extra wide 3 inch wheel so it'll be easy to move around in any terrain and it will swing up to get out of the way. It fits frame sizes from 3 inches to 5 inches and has a 1,500…
view full answer...We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
view full answer...Any given tire size will fit a range of wheel widths. For a 175/80-13 trailer tire it will fit a 13 inch wheel that is 4-1/2, 5, or 5-1/2 inches wide. Wheel #AM20222DX is a 13 x 4-1/2 inch wheel so a 175/80-13 tire will fit on it. This wheel has a 4…
view full answer...Yes, since your current Fulton jack is a bolt-thru style, you can use the Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR with your current welded on bracket. You just need to remove the jack from the included bolt-on bracket and mount it to your…
view full answer...My contact at Ark said the mounting plate for the Ark XO Drop Down Corner RV Stabilizer Jacks #ARK87FR can be installed by modifying it and using countersunk bolts. Attached is a photo of the dimensions for you to reference (117mm long x 72.50mm wide…
view full answer...Since you'll be moving the trailer around by hand on a paved surface, you really wouldn't need a double wheel jack like the Fulton #F27CR. Dual wheels would actually make the trailer a bit more difficult to maneuver around by hand on a paved…
view full answer...I did some searching around on the internet and came up with a few interesting tips to prevent rodents from eating vehicle/trailer wiring. Here is what I found: Noise will keep the rodent's away. So a portable radio would work for this. Flashing…
view full answer...There many possible ways to mount a stabilizer jack such as the #TJ01RT-HD you looked at. Mounting them in the orientation shown the diagram would tend to work a bit better to stabilize the trailer against side to side movement, while having the…
view full answer...I have a replacement jack option for you, but unfortunately there are no replacement parts available for your Wesbar Model 9500 Jack on your 1979 Aristocraft boat trailer. Instead I recommend replacing it with the Fulton Bolt-Thru Swivel Marine Jack…
view full answer...When folded up and traveling the Xtreme Off-Road Ratcheting Trailer Jack item #ORJW750BD is 29" long from the top of the jack to the bottom of the wheels. From the bottom of the wheel to the center pivot point where the bracket attaches is…
view full answer...To make sure the Ark Extreme Off-Road Swing-Up Trailer Jack #ORJW750BD will fit your trailer, there will be two things that need to be confirmed. First will be the tongue weight of the trailer you want to attach it to. This has a static, or resting,…
view full answer...