Customers compare PT701 to these similar products
Products Featured in this Video
Speaker 1: Today, we're going to be taking a look at the Performance Tool ATAK solar motion light. This is a weather proof light and it has a max output of 460 lumens. So, this is going to be a really easy to use weather proof light. It is solar powered, as you can see that little solar panel up at the top. So it's going to provide you with a long lasting light. You don't have to worry… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The tongue of the trailer needs to be above the bed rails so that the trailer can turn correctly when making turns and going over bumps to clear the truck. I will attach a photo to help explain the clearances needed for your trailer.
view full answer...I reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks #Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the…
view full answer...If you had the ATAK Solar Motion Light #PT701 installed on a vehicle or camper and it wasn't turned off then it would detect motion while you were driving and turn on while driving at night, so you would want to turn it off when driving. Using…
view full answer...We do have some motion activated porch lights but part #RVSL31 from Optronics is not one of them. I've linked our complete selection for you. I personally own and use part #DG0132 at my house and it's doing great. It stays on a dim mode all…
view full answer...I called the manufacturer and confirmed that the Solar Powered Outdoor Light for RVs #DG0132 does indeed have a on/off switch. The dimensions are 6" L x 3.75" W x 3.25" H.
view full answer...For your 2011 Keystone Springdale 295 with a 24" wide door and 32" tall entry height I recommend the MORryde StepAbove Fold-Down Steps for 23-3/4" to 26-1/4" RV Door Frames - 8" Drop #MR98RR which will fit perfectly and…
view full answer...The AC units we carry are designed for 14-1/4" x 14-1/4" openings so you would need to alter the hole to have it fit. I always recommend Furrion units as they are the overall best units, as you can see in the attached video, but depending…
view full answer...If you have a typical hole saw set, then you will want to use a 3" hole saw on the Epicord 30 Amp Twist Lock Power Inlet, #277-000138. The outer diameter of the socket that mounts in the RV wall is 2-7/8 inches. If you wanted to be very precise,…
view full answer...The correct replacement hardware you are looking for is Replacement Hardware for Curt A Series and Q Series 5th Wheel Hitches #C16125-SK4. This will secure the Replacement Head Unit for Curt Q24 5th Wheel Trailer Hitch - 24,000 lbs #C16545 to the 5th…
view full answer...Correct, the Replacement Hardware for Curt A Series and Q Series 5th Wheel Hitches Item #C16125-SK4 are meant for attaching the head of the hitch to the legs.
view full answer...The Replacement Hardware for Curt A Series and Q Series 5th Wheel Hitches #C16125-SK4 contains 4 new bolts, flat washers and lock washers for your Curt A16 5th Wheel Trailer Hitch #C16120 to a set of fixed legs. We also have the Replacement Head…
view full answer...There is not an sensitivity adjustment on this unit. You could swap it with one of the other two that are not as sensitive, or you could try taping a piece of foil over part of the sensor. You might also consider the Performance Tools #PT701 which is…
view full answer...