Dimensions of the Kuat Dirt Bag part # DRT15  

The CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems #3481731 that you referenced was designed to fit tires up to 7 inches in width but it will work with a bike that has a 3 inch wide tire assuming it's tied down properly.

The hardware you'll need to mount the Saris Fork Mount Bike Carrier #SATR1BLK to the Saris Traps Fork-Block 3 Bike Rack #SATRK14-BLK3 is as follows: Flat Socket Head Cap Screw 1/4-20x1 Flat Washer 1/4 Nylock Nut 1/4-20 If you jump to the 3:07…

Hey Ryan, so there isn't a special type of pipe that the LaSalle Bristol RV Shower Drain w/ Grid Strainer #34433JN1202 is designed to only work with. The PVC or polyurethane you mentioned from Home Depot would work great.

The Curt 3-Piece Trailer Hitch Receiver #C15511 is designed to fit a frame that is 34" or 37-1/2" across on the inside of the rails. I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver #41990-07 as with your frame having been…

The Kuat Dirtbag Bike Rack #DRT12x100 that you referenced is not threaded. This is a hollow tube that will allow the fork to rest on either side. When mounting the bike you will use the skewer that comes with your fork to secure it to the Dirtbag. It…

Good question. When installing a hitch like the etrailer Class 3 Hitch #e36YR on a 2024 Chevy Blazer, there is more than one way to get the bolts inside the frame rail. What we recommend doing is simply pulling the hardware through the hole at the…

Saris Traps Fork-Block #SATRK34-BLK3 is designed to hold bikes with 9mm axles but not through axle bikes but we do have several truck bed bike racks that will accept through axle bikes, see link. One of the more popular options is the Kuat Dirtbag…

The Saris Bike Wheel Holder for Traps Single Track or Triple Track System #SAWHL1 will fit most wheels. The inside width at base is 4 inches and the length from the axle center to base is 14 inches. It is designed for up to 26 inch wheels but can…

According to Saris when you install the Saris Traps Fork-Block 3 Bike Rack #SATRK33-BLK3 in the bed of a truck with a bed liner you will need to drill through the bed liner as well as the floor of the truck bed and longer bolts may be needed. Towards…